
Add to Cart
600/1000V Cu/XLPE/PVC/ SWA/PVC Low Voltage POWER CABLE 3x185mm2
The armour provides additional protection where mechanical stress has the potential to cause damage to the cable, such as direct burial, outdoors or underground. The armour also enables the cable to withstand higher pulling loads.
It include SWA steel wire armour 3 core cable, and all sizes of these widely used armoured power cables:
600/1000V Cu/XLPE/PVC/ SWA/PVC POWER CABLE 3x6mm2
600/1000V Cu/XLPE/PVC/ SWA/PVC POWER CABLE 3x25mm2
600/1000V Cu/XLPE/PVC/ SWA/PVC POWER CABLE 3x50mm2
600/1000V Cu/XLPE/PVC/ SWA/PVC POWER CABLE 4x4mm2
600/1000V Cu/XLPE/PVC/ SWA/PVC POWER CABLE 3x185mm2
Conductor: plain stranded copper
Insulation: cross-linked polyethylene (XLPE)
Bedding: a layer to create a protective barrier between the insulation and the armour.
Armour: a steel wire armour provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed.
Sheath:PVC
Voltage: voltage ratings of 600/1000V
TECHNICAL DATASHEET-
| |||
Item | Description | Unit | Data |
1 | Applicable Standard | IEC 60502-1, BS5467 | |
2 | Rated Voltage | V | 600/1000 |
3 | Size | mm2 | 3x185 |
4 | Conductor | ||
Cross sectional area | mm2 | 185 | |
Material | Compacted Copper Conductor | ||
No.s Of Wires in Conductor | No.s | Min. 30 | |
Max. D.C. Resistance at 20 ℃ | Ω/km | 0.0991 | |
5 | Insulation | ||
Material | XLPE | ||
Nominal thickness | mm | 1.6 | |
6 | Filler Material(If any) | -- | PP Rope |
7 | Wrapping tape | mm | Non-woven clothing tape |
8 | Inner Sheath | ||
Material | -- | Black PVC | |
Nominal Thickness | mm | 1.4 | |
9 | Armour Layer | ||
Material | Galvanized Steel Wire | ||
Nominal Diameter of steel wire | mm | 2.5 | |
10 | Outer sheath | ||
Material | Black PVC | ||
Nominal thickness | mm | 2.7 | |
11 | Complete cable | ||
Overall diameter (approx.) | mm | 51.9 | |
Weight per km (approx.) | kg | 8,145 |